Bosch WQG235DREU od 17 957 Kč - Zbozi.cz
Samozřejmostí je také dětský zámek ovládání.
5 Cena od 17 956 KčSkladem v 6 obchodech
Neobsahuje 45 ddssg de ekainb real
AIK0 455Wp Full Black 23,3% AIKO-A455-MAH54Mb - Mobler
AIK0 455Wp Full Black 23,3% AIKO-A455-MAH54Mb. 1722 x 1134 x 30 mm
Cena od 2 877 KčNení skladem ve 3 obchodech
Neobsahuje 235 45 ddssg de ekainb real
DIS35023 Myčka 45CM VEST. BEKO za 6390.00CZK - Allegro
Nakupujte levně DIS35023 Myčka 45CM VEST. BEKO (Číslo výrobce - 8690842391774) na Allegro, za 6390.00CZK v kategorii Myčky nádobí. Číslo nabídky 17485349522. Radost z nakupování a 100% zabezpečení každé transakce.
4.7 (88)Cena 6 390 KčSkladem
Neobsahuje 235 ddssg ekainb real
Doosan DA45 Stavební technika leasing
Truck1 nabízí celou řadu leasing pro Doosan DA45 Stavební technika. Dostat do použití náklaďáku za zlomek její hodnoty!
Neobsahuje ddssg ekainb real
Set výrobků Bosch WGG2440REU + WQG235DREU | Datart
Datart - Opravdový elektro specialista. Váš nákup dopravíme po celé ČR, velké spotřebiče zdarma nainstalujeme a předvedeme.
Vyprodáno
Neobsahuje ddssg ekainb real
Vestavná myčka nádobí Gorenje 45 cm bílá GV583C10 | Myčky…
Myčka nádobí s energetickou třídou C. Pomocí funkce TotalDry, která upouští přebytečnou páru je nádobí po vyndání dokonale suché. Samočisticí filtr s automatickou prevencí proti ucpání zabraňuje vniku závad.
Cena 12 990 KčSkladem
Neobsahuje 235 ddssg ekainb real
Nomura - Izumi 45SP 4,5cm/4,3g REAL Stripped BASS
Wobler Izumi Nomura je Top nástraha na jelce a okouny, nebo pstruhy. Tento malý wobler je Suspending, díky tomu jej zastavíte v jakékoliv hloubce a to je ten pravý spouštěč netečných dravců.
Cena 269 Kč
Neobsahuje ddssg de ekainb
dd9764e3-1e9f-4a0b-964a-270accaf5541 | Tgacv
Střední škola technická, gastronomická a automobilní, Chomutov, příspěvková organizace
Neobsahuje 235 45 ddssg de ekainb real
De'Longhi EC235.BK - Pákové kávovary | Expert.cz
Skvělá káva v pohodlí domova Zapomeňte na doby, kdy jste se museli za dobrou kávou vláčet do prověřených kaváren. Od teď si
Cena 2 680 KčSkladem
Neobsahuje ddssg ekainb real
Tapo D235 | Tapo zvonek s kamerou | Tapo
2K 5MP High-Definition Video, 180° Ultra-wide head-to-toe view, Free Smart AI Detection, Up to 512 GB microSD Card Slot, Full Color Night Vision
Neobsahuje ddssg de ekainb real
How to update the firmware of the Tapo&Kasa devices on the Tapo App
The firmware of the TP-Link smart devices can only be updated by using the TP-Link App. Here we introduce the method to update the firmware via the Tapo app, and please make sure you’ve downloaded this app before continuing.Before you begin:
- Please log into the Tapo app with your cloud account and make sure you can control your smart devices.
- Please note that do not power off your smart device during the update.
Method1:
Here we take the Tapo P110 as an example.
Step 1.
On the Home page, tap on your plug model card to go to the plug control panel.
Tap the icon at the top right corner to go to the Device Settings page.
Step 2.
You can tap Firmware Update on the Device Settings page to check for updating the firmware and customizing Auto Update Time.
Note:
- Not all smart devices support the Auto Update feature.
- You can turn off the Auto Update feature according to your needs.
Method 2:
Please go to Me> Firmware Update to check for updates or update the firmware.
Get to know more details of each function and configuration please go to Download Center to download the manual of your product.
Jak zjistit verzi firmwaru mého zařízení TP-Link?
1. Spusťte webový prohlížeč, zadejte do adresního řádku adresu 192.168.1.1 a stiskněte klávesu Enter. U většiny zařízení TP-Link je výchozí IP adresa pro správu “192.168.1.1. U přepínačů je to adresa 192.168.0.1, zatímco u přístupových bodů je to 192.168.1.254.2. Zadejte uživatelské jméno a heslo vašeho modemu. Ve výchozím stavu je uživatelské jméno admin a heslo admin. Pokud jste tyto údaje změnili, zadejte nové uživatelské jméno a heslo. U přepínačů je výchozí uživatelské jméno i heslo supervisor.
3. Informace o firmwaru obvykle najdete na domovské stránce správy.
Směrovač:
Příklad 1:
Příklad 2:
ADSL:
Příklad 1:
Příklad 2:
Přepínač:
Příklad:
Why does the Tapo Doorbell still discharge when powered through hardwiring?
IntroductionSome Tapo doorbells support hardwiring for power. If you find the doorbell still discharges when powered through hardwiring, this article will help you understand what might be happening and how to deal with the abnormality.
Requirements
- Ensure Hardware Installation is complete and wire connections are solid.
- Avoid putting other loads on the same power supply.
- Ensure the used power supply meets the following conditions:
Output Power: ≥10 W (Voltage*Current ≥ 10)
(no polarity distinction required)
Troubleshooting Scenario 1: Always-On Mode is Off
The charging current will be limited to a small value when the Always-On Mode is disabled. If the doorbell’s battery consumption is equal to or higher than the input, its battery level will remain unchanged or discharge gradually.
Step 1. Refer to the Requirements to confirm the doorbell’s hardware installation is qualified.
Step 2. If the Tapo doorbell is installed in conjunction with an existing chime, try bypassing the existing chime, and monitor the doorbell's power consumption for a period.
Step 3. If the doorbell's power consumption remains unusually high even after shorting the existing chime:
- Try to change a transformer. For an AC power supply, its output voltage should ideally be close to 24V, with a higher VA rating preferred.
- Measure the voltage between the terminals on the back of the doorbell when hardwired, and the open-circuit voltage on the doorbell side wires when the doorbell is disconnected from the hardwiring. Check whether the requirements are met.
Step 4. Check whether the power consumption in battery mode is abnormal. If the battery level drops rapidly, refer to the suggestions in What to do if the battery drains quickly on my Tapo battery-powered camera/doorbell?
Scenario 2: Always-On Mode is On
Step 1. Refer to the Requirements to confirm the doorbell’s hardware installation is qualified.
Step 2. Ensure the existing chime is bypassed.
Step 3. Disable the Always-On Mode, and monitor whether the doorbell can be charged correctly for a period. If the doorbell still discharges, refer to the suggestions in Scenario 1 for troubleshooting.
Step 4. Try to change a transformer. For an AC power supply, its output voltage should ideally be close to 24V, with a higher VA rating preferred.
Step 5. Measure the voltage between the terminals on the back of the doorbell when it is hardwired, and the open-circuit voltage on the doorbell side wires when the doorbell is disconnected from the hardwiring. Check whether the requirements are met.
QA Q1: What should I do if I want to use the existing chime?
A1: To keep using the existing chime, do not bypass it and do not enable Always-On Mode. If shorting the existing chime resolves the non-charging issue but you still wish to use the chime, we recommend upgrading to a higher-VA transformer. Also, check whether the existing chime is aging; if it is, consider replacing it with a new mechanical chime.
Q2: How to check the doorbell’s battery consumption
A2: Go to the doorbell Device Settings page in the Tapo APP > Power Options > scroll down, then you can find four charts for the use details of the doorbell: Battery Level, Battery Usage, Time of Use, Wake-up Times.
Frequent operations (Time of Use) or frequent wake-ups (Wake-up Times) will lead to high power consumption. How do I extend the battery life of my Tapo Camera/Doorbell?
Q3: What should I do if the above troubleshooting doesn't work?
A3: If the problem persists after following the above suggestions, please contact TP-Link technical support and provide the following information:
- TP-Link ID and doorbell MAC address.
- Details about the power supply, brand, model, and specifications.
- Your wiring photos or a circuit diagram.
- Device logs obtained by enabling "Diagnostic Mode".
- Brief description of the troubleshooting steps you've performed and the results.
- Measurement data such as open-circuit voltage and load voltage.
odkazuje na služby nejen od Seznam.cz.
© 1996–2025 Seznam.cz, a.s.
